고분자 정공수송층에 용액 공정 도핑법을적용한 인광 유기전기발광소자
Solution processed doping to the polymer hole transporting layer for phosphorescent organic light-emitting diodes
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 유기전기발광소자의 전기적 특성을 향상시키기 위한 방법으로, 용액공정 도핑법이 도입된 고분자 poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(4,4′-(N-(4-sec-butylphenyl)diphenylamine)] (TFB)기반의 정공수송층을 제안하였다. 정공수송층 소재 TFB 용액 내에 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile (HAT-CN)를 3 wt% 도핑을 하여 정공수송층의 전기적 특성을 향상 시켰다. 이를 통해 HAT-CN이 도핑된 TFB을 이용한 유기전기발광소자에서는 향상된 정공수송층의 전도도를 통해 동일 구동 전압 시 전류 밀도와 휘도가 증가하였고, 점등 개시 전압이 13V에서 9V로 줄어드는 것을 확인하였다. 또한, 도핑법이 적용되지 않은 기준 소자 대비 최대 외부양자효율이 3.6%에서 10.8%로 약 3배 향상 되는 것을 확인하였다.
Abstract
In this study, a facial way to enhance the electrical properties of organic light-emitting diodes (OLEDs) via the solutionprocess doping method based on the poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(4,4′-(N-(4-sec-butylphenyl) diphenylamine)](TFB) as a hole transporting layer (HTL) is demonstrated. In the TFB solution of the hole transport material, 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile (HAT-CN) was doped by 3 wt% to improve the electrical properties of the HTL. According, the OLED with HAT-CN doped TFB showed the increased current density and luminance at the samedriving voltage on behalf of the improved conductivity of HTL, and the reduced turn-on voltage from 13 V to 9 V. Furthermore, the maximum external quantum efficiency was dramatically increased three times from 3.6 to 10.8 %compared to the reference device without appling doping methode.
참고문헌 (16)
- M. Cai, "High-Efficiency Solution-Processed Small Molecule Electrophosphorescent Organic Light-Emitting Diodes", Adv. Mater, 23, pp.3590~3596 (2011)[DOI]
- L. Duan, "Solution processable small molecules for organic light-emitting diodes", J. Mater. Chem, 20, pp.6392~6407 (2010)[DOI]
- H-W. Chang, "Color-stable, ITO-free white organic light-emitting diodes withenhanced efficiency using solution-processed transparentelectrodes and optical outcoupling layers", Organic Electronics, 15, pp.1028~1034 (2014)[DOI]
- H. Choi, "Solution processed WO3layer for the replacement of PEDOT：PSS layer in organic photovoltaic cells", Organic Electronics, 13(6), pp.959~968[DOI]
- Y H. Kim, "Achieving High Ef fi ciency and Improved Stability in ITO-Free Transparent Organic Light-Emitting Diodes with Conductive Polymer Electrodes", Adv. Funct. Mater, 23, pp.3763~3769 (2013)[DOI]
- S. Murase, "Solution Processed MoO3 Interfacial Layer for Organic Photovoltaics Prepared by a Facile Synthesis Method", Adv. Mater, 24, pp.2459~2462 (2012)[DOI]
- M. R. Nagar, "Solution Process Feasible Highly Efficient Organic Light Emitting Diode with Hybrid Metal Oxide Based Hole Injection", Transport Layer, 1~9
- J. J. Park, "Small molecule interlayer for solution processed phosphorescent organic light emitting device", Organic Electronics, 10, pp.189~193 (2009)[DOI]
- L. S. Liao, "Power efficiency improvement in a tandem organic light-emitting diode", Appl. Phys. Lett, 92, pp.223311~ (2008)[DOI]
- J-H. Lee, "A high performance transparent inverted organic light emitting diode with 1,4,5,8,9,11-hexaazatriphenylenehexacarbonit rile as an organic buffer layer", J. Mater. Chem, 22(15262) (2012)[DOI]
- 이재현, "Hexaazatrinaphthylene 유도체를 정공 주입층으로 사용한 고효율 녹색 인광 OLEDs", 공업화학, 26(6), pp.725~729 (2015), 한국공업화학회
- S. Reineke, "Reduced efficiency rolloff in phosphorescent organic light emitting diodes by suppression of triplet-triplet annihilation", Appl. Phys. Lett, 91(123508) (2007)
- J. Meyer, "Highly efficient simplified organic light emitting diodes", Appl. Phys. Lett, 91, pp.113506~ (2007)[DOI]
- G. Rajanm, "Study of injection and transport properties of metal", organic interface using HAT-CN molecules as hole injection layer, pp.146(2017), 530~536
- Y. Xu, "Doping: A Key Enabler for Organic Transistors", Adv. Mater, 30, pp.1801830~ (2018)[DOI]
- M. Schwarze, "Molecular parameters responsible for thermally activated transport in doped organic semiconductors", Nature Materials (2018)[DOI]