Effects of experimental conditions on synthesis of titanium carbide crystallites
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The temperature-programmed reduction of titanium oxide (TiO2) with pure CH4 was used for the preparation of titanium carbide crystallites. The synthesized materials had the different surface areas, indicating that the structural properties of these materials were strong functions of two different heating rates and space velocity employed. The titanium carbide crystallites were active for NH3 decomposition. Since the reactivity varied with changes in the particle size,ammonia decomposition reactivity over the titanium carbides crystallites appeared to be related to the different active species. The reactivities of titanium carbide crystallites were two and three times lower than those of the vanadium and molybdenum carbide crystallites, respectively. These results suggested that the difference in activities might be related to the degree of electron transfer between metals and carbon.
Abstract
The temperature-programmed reduction of titanium oxide (TiO2) with pure CH4 was used for the preparation of titanium carbide crystallites. The synthesized materials had the different surface areas, indicating that the structural properties of these materials were strong functions of two different heating rates and space velocity employed. The titanium carbide crystallites were active for NH3 decomposition. Since the reactivity varied with changes in the particle size,ammonia decomposition reactivity over the titanium carbides crystallites appeared to be related to the different active species. The reactivities of titanium carbide crystallites were two and three times lower than those of the vanadium and molybdenum carbide crystallites, respectively. These results suggested that the difference in activities might be related to the degree of electron transfer between metals and carbon.
참고문헌 (13)
- D.J. Sajkowski, "Symposium on the chemistry of W", Mo catalysis, 1990, pp.35(2), 233~
- J.-G. Choi, "Synthesis and characterization of molybdenum nitride hydrodenitrogenation catalysts", Catalysis Today, 15, pp.201~ (1992)
- L. leclercq, "Preparation of catalysts II", pp.627~ (1978), Elsevier
- L. Volpe, "Ammonia synthesis on molybdenum nireide", J. Phys. Chem., 90, pp.4874~ (1986)
- J.-G. Choi, "Synthesis and catalytic properties of niobium carbides: The effect of synthesis conditions", J. of Sci. Res. Inst. Hannam Univ., 29, pp.417~ (1999)
- R.B. Levy, "Platinum-like behavior of tungsten carbide in surface catalysis", Science, 181, pp.547~ (1973)
- J.H. Singelt, "Transition metal carbides", Nature Phys. Sci., 229, pp.27~ (1971)
- L.E. Toth, "Transition metal carbides and nitrides", pp.234~ (1971), Academic Press
- J.-G. Choi, "Pyridine hydrodenitrogenation over molybdenum carbide catalysts", J. Catal., 154, pp.33~ (1995)
- J.-G. Choi, "Ammonia decomposition over vanadium carbide catalysts", J. Catal., 182, pp.104~ (1999)
- J.-G. Choi, "The influence of surface properties on catalytic activities of tantalum carbides", Appl. Catal. A: General, 184, pp.189~ (1999)
- J.-G. Choi, "Synthesis and catalytic properties of vanadium interstitial compounds", Appl. Catal., 168, pp.47~ (1998)
- G.V. Samsonov, "Catalytic properties of carbides and silicides of transition metals in the dehydrogenation of ethyibenzene to styrene", Kinet. Katal., 10, pp.863~ (1969)