직화소성법으로 제조된 인공골재의 특성 분석
Characterization of artificial aggregates fabricated with direct sintering method
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
무기성 폐기물인 준설토를 원료로 인공골재를 제조함에 있어, 직화소성법을 이용하여 소성온도(1100 및 1200oC)와 시간(10~60 min)을 변수로 하여 인공골재의 부피비중, 흡수율 그리고 미세구조를 제어하였다. 또한 직화소성과 기존에발표된 승온소성의 방법 차이에 따른 인공골재의 물성을 비교 분석하였다. 직화소성 시, 소성온도가 1100oC에서 1200oC로증가하면, 껍질의 두께가 증가함과 동시에 블랙 코어 부분의 기공크기가 증가하면서 골재의 부피비중이 1.0 이하를 나타내었다. 또한 같은 소성온도에서 소성시간이 증가할수록 블랙코어의 단면적이 감소하고, 껍질의 두께가 증가하면서 흡수율이감소하였다. 부피비중 1.0 이하의 인공골재는 직화소성이나 승온소성으로 제조된 경우 모두 블랙 코어부분의 미세구조가서로 비슷한 경향을 나타내었다. 반면, 껍질(shell)의 미세구조는 승온소성된 경우에 더 치밀한 구조를 나타냈으며, 따라서직화소성된 골재의 흡수율이 상대적으로 높았다. 이로서 직화소성법은 세라믹 담체 또는 흡착제등에 적용될 인공골재 제조에 적합한 방법임을 알 수 있었다.
Abstract
The bulk density, water absorption and microstructure of the artificial aggregates were controlled as a function of sintering temperature (1100 and 1200oC) and time (10~60 min) in the fabrication process of the artificial aggregates by the direct sintering process using dredged soil, the inorganic wastes. Also, the physical properties of the artificial aggregates fabricated according to the different sintering methods such as the direct sintering method used in this study and the increasing temperature sintering method used in the previous report, were compared and analysed. The bulk density of aggregates sintered at 1200oC by the direct sintering method showed below 1.0, and the thickness of a shell and the pore size of the black core were increased with sintering temperature. Also, in the same sintering temperature, the area of black core was decreased, the thickness of shell was increased and the water absorption was decreased with sintering time. The black core of artificial aggregates of bulk density below 1.0 had the similar microstructure, regardless of sintering methods. In contrast, the shell of aggregates fabricated by the increasing temperature sintering method showed more dense microstructure than that by direct sintering method, hence the water absorption of aggregate sintered using direct sintering was relatively high. Thus, the direct sintering method is suitable for fabrication of artificial aggregates in ceramic carriers or absorbents applications.
참고문헌 (16)
- C.R. Austin, "Basic factors involved in bloating of clays", American Institute of Mining and Metallurgical Engineer Technical Publication, 1486, pp.1~ (1942)
- W.L. Fisher, "Bloating characteristics of east texas clays", Bureau of Economic Geology Geological Circular, 65(1) (1965)
- S.M. Han, "Preparation for porous ceramics using low grade clay", J. of the Kor. Ceram. Soc, 35(6), pp.575~ (1998)
- V.F. Pavlov, "The effect of Viscosity change in the 800~1200oC range on the Vitrification and bloating of low-refractory clays", Glass and Ceramics, 17(3), pp.133~ (1960)
- C.M. Riley, "Relation of chemical properties to the bloating of clays", J. of the American Ceram. Soc, 34(4), pp.121~ (1951)
- A. Barba, "Oxidation of black coring during the firing of ceramic ware-3. influence of the thickness of the piece and the composition of the black core", British Ceramic Transactions and Journal, 91, pp.36~ (1992)
- W.E. Brownell, "Black coring in structural clay products", J. of the American Ceram. Soc, 40(6), pp.179~ (1957)
- S.S. Cava, "Suppressing Black coring in single-fire ceramic tiles by controlling kiln atmospheres", pp.15~ (1998), Castellón
- K.J.D. MacKENZIEA, "A57Fe Mössbauer study of black coring phenomena in clay-based ceramic materials", Journal of the Material Science, 25, pp.2937~ (1990)
- F. Negre, "Oxidation of black core during the firing of ceramic ware-2. process kinetics", British Ceramic Transactions and Journal, 91, pp.5~ (1992)
- P.S. Nicholson, "Kinetic of oxidation of natural organic materials in clays", J. of the American Ceram. Soc, 53(3), pp.154~ (1970)
- V.Z. Abdakhimov, "Formation of the black core in high-speed firing of floor tiles", Glass and Ceramics, 56, pp.263~ (1999)
- V. Beltrán, "Formation of black core during the firing of floor and wall tiles", Interceram, 3, pp.15~ (1988)
- 김강덕, "다양한 승온조건으로 제조된 인공골재의 특성", 한국결정성장학회지, 20(6), pp.301~306 (2010), 한국결정성장학회
- Korea Concrete Institute, "New Concrete Engineering", pp.67~ (2007), Kimundang
- 신대용, "석탄회를 이용한 미생물 고정화 세라믹 담체 제조", 한국세라믹학회지, 39(9) (2002), 한국세라믹학회