Characteristics of sintered fly ash-clay body prepared by slip processing and its applicability for foundation soils
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The civil engineering properties for the coal fly ash produced from a power plant mixed with sintered powders made from the fly ash-clay slip system were measured and its applicability for the foundation soils was investigated. The F-slip whose dispersion state is ‘not good’ and C-slip which is re-flocculated by adding a flocculant to a well-dispersed slip were fabricated and then sintered. The sintered body made from C-slip had more uniform microstructure than that of F-slip, therefore, the bulk density and compressive strength were improved. The civil engineering properties such as compression index, compressive strength, permeability coefficient of fly ash were improved by mixing 0.84~2 mm powders obtained by crushing a sintered body made from C-slip. Therefore, the applicability of mixed powders composing of fly ash and sintered body made from C-slip was confirmed to foundation soils due to its improved civil engineering properties.
Abstract
The civil engineering properties for the coal fly ash produced from a power plant mixed with sintered powders made from the fly ash-clay slip system were measured and its applicability for the foundation soils was investigated. The F-slip whose dispersion state is ‘not good’ and C-slip which is re-flocculated by adding a flocculant to a well-dispersed slip were fabricated and then sintered. The sintered body made from C-slip had more uniform microstructure than that of F-slip, therefore, the bulk density and compressive strength were improved. The civil engineering properties such as compression index, compressive strength, permeability coefficient of fly ash were improved by mixing 0.84~2 mm powders obtained by crushing a sintered body made from C-slip. Therefore, the applicability of mixed powders composing of fly ash and sintered body made from C-slip was confirmed to foundation soils due to its improved civil engineering properties.
참고문헌 (12)
- "Fly Ash for Soil Improvement", ASCE Geotechnical Special Publication, 36, pp.1993~
- D.H. Gray, "Engineering properties of compacted fly ash", pp.361~ (1972), SM 4, ASCE
- R.C. Joshi, "New & conventional engineering uses of fly ash", J. of Transportation Engineering ASCE, 791 (1975)
- J.H. Jung, "Study on the fly ash applications", Chemistry Eng. and Tech, 7(1), pp.49~ (1989)
- B.S. Chun, "Study on the characteristics of fly ash produced as an industrial wastes", J. Kor. Civil Eng, 10(1), pp.115~ (1990)
- Y.Y. Kim, "Compressive characteristics comparison of reinforced and un-reinforced lightweight soils for dredged clays", J. Kor. Ocean Eng, 19(6), pp.44~ (2005)
- J.C. Kim, "Engineering properties of lightweight porous mixed soils using by dredged clays", J. Kor. Ground Eng, 18(4), pp.309~ (2002)
- S.K. Mukherji, "The utilization of fly ash in the preparation of ceramic tableware and artware", Br. Ceram. Trans, 92(6), pp.254~ (1993)
- G.G. Lee, "Rheological behavior of coal-fly-ash and clay slip", J. Kor. Ceram. Soc, 35(2), pp.180~ (1998)
- M.M. Kim, "Soil Mechanics", pp.19~ (1999), Moonwundang
- "ibidem reference", 10, pp.84~
- G.G. Lee, "Analysis of pore structure for porous body with coal fly ash and clay", Kor. J. Crystallography, 9(1), pp.64~ (1998)