화력발전소 바닥재를 이용한 인공경량골재의 표면개질에 관한 연구
A study on the surface modification of artificial lightweight aggregates by using bottom ash from coal power plant
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
석탄 화력발전소에서 발생되는 바닥재와 준설토를 이용하여 인공경량골재를 제조하였다. 소성 온도별, 골재 조 성별, 그리고 석회석(CaCO3)을 코팅 양별 비교를 통하여 골재 표면에 형성된 융제량의 변화, 비중, 흡수율, 절단면 관찰 등 의 골재 물성 비교가 수행되었다. 결론적으로 골재 무게비 CaCO3 10 %를 골재 표면에 코팅하여 표면개질을 함으로써 골재 내부의 거대 기공의 형성을 억제시켜 비중을 조절할 수 있었으며, 표면 융제를 대폭 감소시켜 골재간 융착 현상을 방지할 수 있으며, 흡수율 또한 효과적으로 감소시켜 경량골재를 포함한 경량콘크리트 타설시 펌핑 문제를 향상시킬 수 있을 것으 로 판단되었다.
Abstract
Artificial lightweight aggregates were produced by using bottom ashes and dredged soils from coal power plant. The amount of glassy phases on the aggregate surfaces, specific gravities, absorption rates, and observations of crosssectional surfaces were compared according to the compositions, sintering temperatures, and the amount of coating. It is concluded that surface modification by 10 % CaCO3 coating on the aggregate surfaces enhances the properties of aggregates as follows: Specific gravities were controlled by depressing formation of large pores in the aggregates. Sticking phenomena among aggregates during the sintering process was drastically decreased by reducing glassy phases on the aggregate surfaces. Pumping problems during the application of ready-mix concretes containing lightweight aggregates having high value of absorption rates could be solved by reducing the absorption rate.
참고문헌 (8)
- 신상욱, "석탄재의 강도 특성에 관하여", 한국지반환경공학회 논문집, 8(2), pp.57~63 (2007), 한국지반환경공학회
- M. Song, "An experimental study on properties of motar using bottom ash produced in power plant", J. Architectural Institute of Korea, 23, pp.203~ (2003)
- S.D. Kang, "A study on manufacturing of autoclave lightweight concrete with fine sludge of crusined sand", J. Kor. Institute of Mineral and Energy Resources Engineers, 35, pp.264~ (1998)
- 김강덕, "석탄 바닥재와 점토를 이용한 인공경량골재 제조", 한국결정성장학회지, 17(6), pp.277~282 (2007), 한국결정성장학회
- J.H. Lee, "A study on the strength properties of concrete containing bottom ash as a part of fine aggregate", J. Architectural Institute of Kor., 21, pp.359~ (2001)
- C.S. Yi, "A computer simulation of transport phenomena in a roller kiln", Journal of RIEET, 5, pp.133~ (1999)
- A. Barba, "Oxidation of black core during the firing of ceramic ware-3. influedce of the thickness of the piece and the composition of the black core", Br. Ceram. Trans. J., 91, pp.36~ (1992)
- F. Negre, "Oxidation of black core during the firing of ceramic ware-2. process kinetics", Br. Ceram. Trans. J., 91, pp.5~ (1992)