Ni3[Co(CN)6]2 PBA 나노큐브를 통한 단분산된 3차원 구조의 NiO/NiCo2O4 제조 및 특성 평가
Synthesis and characterization of three-dimensional monodispersed NiO/NiCo2O4 via Ni3[Co(CN)6]2 PBA nanocubes
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Ni3[Co(CN)6]2 PBAs의 하소과정을 통해 단분산된 NiO/NiCo2O4 나노큐브를 성공적으로 합성했다. 단분산된Ni3[Co(CN)6]2 PBAs 나노큐브는 수열합성 반응 시 생성된 핵 들의 ‘자기조립’에 의해 형성된다. 이때 입자의 자기조립 속도는 온도와 계면활성제인 SDBS(Sodiumdodecylbenzenesulfonate)의 양에 의해 영향을 받으며, FESEM 분석을 통하여 SDBS: 0.25 g, 온도: 60 o C에서 단분산된 200 nm의 PBA 나노큐브들을 얻을 수 있었다. 최적의 하소 조건을 결정하기 위해Thermogravimetric-Differential Thermal Analysis(TG-DTA)를 통해 열적 거동을 확인하였다. 그리고 PBA 전구체 및 NiO/ NiCo2O4 입자의 형상과 결정성을 확인하기 위해 Field emission scanning electron microscopy(FESEM)과 X-ray diffraction (XRD) 분석을 진행하였다.
Abstract
NiO/NiCo2O4 nanocubes were successfully synthesized via the calcination process of Ni3[Co(CN)6]2 PBAs. The prepared monodispersed Ni3[Co(CN)6]2 PBAs were aggregated by ‘self-assembly’ of the nuclei generated during the synthesis reaction. The self-assembly rate of the particles is affected by the temperature and the amount of surfactant SDBS (sodium dodecylbenzenesulfonate). FESEM analysis shows that monodispersed 200 nm PBA nanocubes are obtained at 0.25 g SDBS and 60 o C temperature. Thermal behavior was confirmed by thermogravimetric-differential thermal analysis (TG-DTA) to determine optimal calcination conditions. Then, field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) analyzes were performed to investigate the morphology and crystallinity of the particles precursors and NiO/ NiCo2O4 nanocubes.
참고문헌 (20)
- D. G. Dmitry, "Template synthesis and photocatalytic properties of porous metal oxide spheres formed by nanoparticle infiltration", Chem. Mater., 16, pp.1834~ (2004)
- Y. Su, "Synthesis of mesoporous cerium-zirconium binary oxide nanoadsorbents by a solvothermal process and their effective adsorption of phosphate from water", Chem. Eng. J., 268, pp.270~ (2015)
- F. E. Annanouch, "Aerosol-assisted CVD-grown WO3 nanoneedles decorated with copper oxide nanoparticles for the selective and humidity-resilient detection of H2S", ACS Appl. Mater. Interfaces, 7, pp.6842~ (2015)
- Z. Zhu, "Highperformance hole-extraction layer of sol-gel-processed NiO nanocrystals for inverted planar perovskite solar cells", Angew. Chem., 126, pp.12779~ (2014)
- J. F. Marco, "Cation distribution and magnetic structure of the ferromagnetic spinel NiCo2O4", J. Mater. Chem., 11, pp.3087~ (2001)
- Y. Zhang, "Binary metal oxide: advanced energy storage materials in supercapacitors", J. Mater. Chem. A, 3, pp.43~ (2015)
- X. Y. Yu, "Facile synthesis of urchin-like NiCo2O4 hollow microspheres with enhanced electrochemical properties in energy and environmentally related applications", ACS Appl. Mater. Interfaces, 6, pp.3689~ (2014)
- A. K. Mondal, "A microwave synthesis of mesoporous NiCo2O4 nanosheets as electrode materials for lithium-ion batteries and supercapacitors", ChemPhysChem, 16, pp.169~ (2015)
- J. Du, "Ultrathin porous NiCo2O4 nanosheet arrays on flexible carbon fabric for high-performance supercapacitors", ACS Appl. Mater. Interfaces, 5, pp.7405~ (2013)
- X. Gao, "Hierarchical NiCo2O4 hollow microcuboids as bifunctional electrocatalysts for overall watersplitting", Angew. Chem. Int. Ed., 55, pp.6290~ (2016)
- N. Padmanathan, "Solvothermal synthesis of mesoporous NiCo2O4 spinel oxide nanostructure for high-performance electrochemical capacitor electrode", Ionics, 19, pp.1535~ (2013)
- T. Y. Wei, "A cost-effective supercapacitor material of ultrahigh specific capacitances: spinel nickel cobaltite aerogels from an epoxide-driven sol-gel process", Adv. Mater., 22, pp.347~ (2010)
- 2 (M =Mn, Fe, Co, Ni, Cu, Zn), "J. Am. Chem. Soc.", 2005, 6506~
- H. Li, "Structural evolution of a metal-organic framework and derived hybrids composed of metallic cobalt and copper encapsulated in nitrogen-doped porous carbon cubes with high catalytic performance", CrystEngComm., 19, pp.64~ (2017)
- Z. Liu, "Complex-surfactant-assisted hydrothermal route to ferromagnetic nickel nanobelts", Adv. Mater., 15, pp.1946~ (2003)
- 설수덕, "환경친화적인 무기", 유기 Core-Shell의 제조에 관한 연구, 2004, pp.19(1), 81~87[DOI]
- C. Yu, "Nanohybrids from NiCoAl-LDH coupled with carbon for pseudocapacitors: understanding the role of nanostructured carbon", Nanoscale, 6, pp.3097~ (2014)
- G. Huang, "Metalorganic framework derived Fe2O3@NiCo2O4 porous nanocages as anode materials for Li-ion batteries", Nanoscale, 6, pp.5509~ (2014)
- B. K. Kang, "Mesoporous Ni-Fe oxide multi-composite hollow nanocages for efficient electrocatalytic water oxidation reactions", J. Mater. Chem. A, 5, pp.4320~ (2017)
- A. Opalinska, "Size-dependent density of zirconia nanoparticles", Beilstein J. Nanotechnol., 6, pp.27~ (2015)
