Formation pattern 연구를 통한 AGM 연축전지의 충전 효율 향상
Improvement of charging efficiency of AGM lead acid battery through formation pattern research
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
CO2 가스 발생 감소와 연비향상을 위해서 HEV 차량은 ISG 시스템을 채용하고 있다. 이 ISG 시스템은 배터리가 감당해야 하는 전기 부하를 증대시켰고, 시동 횟수도 급격히 늘어나게 하였다. 이를 위해 AGM 연축전지가 개발되어 사용되고 있으나, 종래의 연축전지에 비해서 formation 중 전해액량 조절이 더 높은 수준으로 유지해야 됨에 따라 충전시간이약 3배 가량 길어지게 되었다. 본 연구에서는 formation pattern의 최적화를 통해서 충전효율을 증대시켜 충전시간을 단축하고자 하였다. formation pattern의 최적화를 위해서, 16개 multi step에 10개 충전 step과 6개의 방전 step을 적용하고, step별충전 전류를 조절한 4가지 조건(21 hr, 24hr , 27 hr, 30 hr)으로 시험을 진행하였다. 그 결과 24 hr 시험 조건이 PbO2 변환율이 가장 높게 분석되었고, 용량 103.3%, 저온시동성능 38 sec, 충전수입성 37.36A로 나타났다. Multi-step과 방전 step을 적용한 충전 프로그램의 결과, 충전 중에 국부적으로 급격히 발생된 분극화를 제거하고 전류의 손실을 최소함으로써 충전효율을 증가시킬 수 있음을 검증하였다. 이렇게 충전효율을 증가시킴으로써 본 연구에서는 충전시간을 기존에 비해서 약30 % 감소시키는 탁월한 결과를 얻을 수 있었다.
Abstract
In order to improve fuel economy and reduce CO2, HEV adopts ISG system as a standard. This ISG system increased the electric load that the battery had to bear, and the number of starting increased rapidly. AGM Lead Acid batteries have been developed and used, but the charging time is about three times longer as the electrolyte amount control during formation must be maintained at a higher level compared to conventional lead-acid batteries. In this study, we tried to shorten the charging time by increasing the charging efficiency through the optimization of the formation pattern. In order to optimize the Formation Pattern, 10 charging steps and 6 discharging steps were applied to 16 multi steps, and the charging current for each step was controlled, and the test was conducted under 4 conditions (21 hr, 24 hr, 27 hr, 30 hr). Asa result of simultaneous application of multi-step and discharge step, it was verified that minimizing the current loss and eliminating the sudden polarization during charging contributes to the improvement of charging efficiency. As a result, it showed excellent results in reducing the charging time by about 30 % with improved charging efficiency compared to the previous one.
참고문헌 (12)
- K. Kawajiri, "Lightweight materials equal lightweight greenhouse gas emissions? : A historical analysis of greenhouse gases of vehicle material substitution", J. Cleaner Production, 253, pp.119805~ (2020)
- J. Yu, "Apparatus and method for guidiing deactivation of battery sensor of isg vehicles, US2012", 0133500 A1, 2012
- K. Sawai, "Idling-stop vehicle road tests of advanced valve-regulated lead-acid(VRLA)battery", J. Power Sources, 174, pp.54~ (2007)
- D. Pavlov, "Benzyl benzoate as an inhibitor of the sulfation of negative electrodes in leadacid batteries", J. Energy Storage, 17, pp.336~ (2018)
- 임태섭, "나노 사이즈 입자가 포함된 양극 활물질 함량에 따른 차량용 AGM 연축전지 성능특성", 한국결정성장학회지, 30(4), pp.123~130 (2020), 한국결정성장학회[DOI]
- E. Ebner, "Carbon blacks for the extension of the cycle life in flooded lead acid batteries for micro-hybrid applications", J. Power Sources, 239, pp.483~ (2013)
- M. Fernandez, "The use of activated carbon and graphite for the development of lead-acid batteries for hybrid vehicle applications", J. Power Sources, 195, pp.4458~ (2010)
- S. Kim, "Fast-charging of a lead-acid cell : effect of rest period and depolarization pulse", J. Power Sources, 89, pp.93~ (2000)
- H. Gu, "A mathematical model of a lead-acid cell : discharge, rest, and charge", J. Electrochem. Soc, 134, pp.2953~ (1987)
- M. Maja, "A model for simulating fast charging of lead", acid batteries, 1992, pp.40, 81~
- D. Calasanzio, "Fast charging of lead", acid batteries, 1993, pp.46, 375~
- L. T. Lam, "Pulsed-current charging of lead", acid batteries — a possible means for overcoming premature capacity loss?, 1995, pp.53, 215~