한지 원재료인 닥나무와 인피섬유의 해부학적․화학적 특성 연구
Anatomical, Morphological, and Chemical Characteristics of Paper‐mulberry Wood and Bast Fiber for Raw Material of Korean Paper(Hanji)
2
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
본 연구는 닥나무의 삼단면 관찰을 통하여 공통된 해부학적 특성을 가지는지 확인하고 닥나무 인피섬유의 섬유장·폭, 내강폭과 같은 형태학적 특징과 화학적 특징을 통해 펄프, 제지공정에 영향을 미칠 수 있는 인자들을 분석하였다. 닥나무는 환공재, 반환공재이며 대도관이 고립관공으로 방사상배열이다. 접선단면 방사조직은 1~3열이고 나선비후가 관찰되어져 공통적으로 동일한 해부학적 특성이 나타났다. 인피섬유의 형태학적 특징으로는 섬유장 6.58~9.01 mm, 섬유폭 15.85~27.80 μm, 내강폭 4.50~12.54 μm로 나타났다. 펄프, 제지공정에 중요한 특성으로 여겨지는 runkel ratio, slenderness ratio 등을 고려했을 때 강원도 D시료가 가장 적합하였다. 인피섬유의 화학적 특성으로 경상도 C시료가 낮은 추출물 함량과 높은 셀룰로오스 함량을 가지는 것을 확인하였다. 섬유의 형태학, 화학적 특성은 한지 제조 후 품질을 결정하는 주요 인자의 기초자료로 활용될 것이다.
Abstract
This study using a method different from those employed previously, the anatomical characteristics of paper-mulberry wood were confirmed by observing three different sections. In addition, the factors affecting the pulp and papermaking processes were analyzed in terms of morphological properties such as the fiber length and width, lumen width, and chemical composition of the paper-mulberry bast fiber. The anatomical characteristics of the paper-mulberry wood were a ring porous or semi-ring porous structure with the vessels showing solitary pore and radial array. The medullary ray of the tangential section showed 1-3 rows and common helical thickening. Consequently, the paper-mulberry wood has the same anatomical characteristics throughout. The morphological characteristics of the paper-mulberry bast fiberare a fiber length of 6.58 to 9.01 mm, fiber width of 15.85 to 27.80 μm, lumen width of 4.50 to 12.54 μm. The D sample of Gangwon was the most suitable for the pulp and papermaking processes, in terms of its derived morphological ratios. Comparing the chemical compositions, the C sample of Gyeongsang had a high holocellulose content (90%). Thus, the findings herein will aid in determining the quality of Korean paper post production.
참고문헌 (20)
- Choi, T. H., "New Korean traditional papermaking from Morus spp. (I)-Anatomical and chemical properties and pulping characteristics", Journal of Korea TAPPI, 31(3), pp.96~104 (1999)
- Choi, T. H., "Anatomical characteristics of mulberry bast fiber by location", Journal of Korea TAPPI, pp.298~303 (2007)
- Dutt, D., "Comparison of various eucalyptus species for their morphological, chemical, pulp and paper making characteristics", Indian Journal of Chemical Technology, 18(2), pp.145~151 (2011)
- Ekhuemelo, D.O., "Investigation of variations in the fibre characteristics of Moringa Oleifera (Lam) stem for pulp and paper production", International Journal of Science and Technology, 5(1) (2016)
- Morphology of pulp fiber from hardwoods and influence on paper strength, "Horn, R.A.", 1~12 (1978)
- Hutchinson, J., "The genera of flowering plants", pp.1~516 (1967), Oxford at the Clarendon Press, Lincoln
- Kang, S.H., "Characteristics of charcoal from major Korean wood species", 2004 Proceedings of the Korean Society of Wood Science and Technology, 22-23, pp.63~66 (2004)
- Kim, H. C., "Studies on the mechanical and functional properties of Hanji", Ph. D, pp.2007
- 김민지, "황벽나무의 해부학적 특성", 펄프종이기술, 49(2), pp.63~68 (2017), 한국펄프·종이공학회[DOI]
- Kim, M. Y., "A taxonomic study of the Korean Broussonetia(Moraceae) by multivariate analyses", Korean Journal of Plant Taxonomy, 22(4), pp.241~254 (1992)
- Lee, H. R., "Paper Science", pp.387~389 (1996), Gwangilmunhawsa, Seoul
- Lee, Y. S., "A study on the characteristics and suitability of broussonetia kazinoki for erosion control species", Master’s, pp.2017
- Ogbonnaya, C. I., "Physical and histochemical properties of kenaf(Hibiscus cannabinus L.) grown under water deficit on a sandy soil", An International Journal of Industrial Crops and Products, 7(1), pp.9~18 (1997)
- 오승원, "닥나무 목질부로 제조된 보드의 성질(Ⅰ)", 목재공학, 37(3), pp.216~221 (2009), 한국목재공학회
- Ilvessalo-Pfäffli, M-S., "Fiber Atlas: Identification of papermaking fibers", pp.299~ (1995), Springer
- Sadiku, N. A., "Fibre dimension and chemical characterisation of naturally grown Bambusa vulgaris for pulp and paper production", Journal of Bamboo and Rattan, 15(1-4), pp.33~43 (2016)
- Seth, R. S., "Fibre quality factors in papermaking - II The importance of fibre coarseness, materials interactions felevant to the pulp", Paper and Wood Industries, 197, pp.1~143 (1990)
- Yoon, B.H., "Forest chemistry experiment book", pp.80~81 (1998), Hyangmunsa
- 윤경원, "Taxonomic study of Broussonetia (Moraceae) in Korea", 식물분류학회지, 39(2), pp.80~85 (2009), 한국식물분류학회
- Zhu, J. Y., "Effects of plantation density on wood density and anatomical properties of red pine (Pinus resinosa Ait.)", Wood and fiber science, 39(3), pp.502~512 (2007)