본문 바로가기
KERD
논문KCI 등재

Application of Three‐dimensional Scanning, Haptic Modeling, and Printing Technologies for Restoring Damaged Artifacts

홍성혁|조영훈
한국문화재보존과학회 (The Korean Society Of Conservation Science For Cultural Properties)|2019.02|보존과학회지 (Journal of Conservation Science)|제35권 제1호|pp. 71-80|DOI https://doi.org/10.12654/JCS.2019.35.1.08

0

조회

0

다운로드

7

인용

0

참고문헌

키워드

3D printing3D scanningDigital technologyVirtual restorationHaptic interface4D printing
주제분류자연과학일반

초록

This study examined the applicability of digital technologies based on three-dimensional(3D) scanning, modeling, and printing to the restoration of damaged artifacts. First, 3D close-range scanning was utilized to make a high-resolution polygon mesh model of a roof-end tile with a missing part, and a 3D virtual restoration of the missing part was conducted using a haptic interface. Furthermore, the virtual restoration model was printed out with a 3D printer using the material extrusion method and a PLA filament. Then, the additive structure of the printed output with a scanning electron microscope was observed and its shape accuracy was analyzed through 3D deviation analysis. It was discovered that the 3D printing output of the missing part has high dimensional accuracy and layer thickness, thus fitting extremely well with the fracture surface of the original roof-end tile. The convergence of digital virtual restoration based on 3D scanning and 3D printing technology has helped in minimizing contact with the artifact and broadening the choice of restoration materials significantly. In the future, if the efficiency of the virtual restoration modeling process is improved and the material stability of the printed output for the purpose of restoration is sufficiently verified, the usability of 3D digital technologies in cultural heritage restoration will increase.

Abstract

This study examined the applicability of digital technologies based on three-dimensional(3D) scanning, modeling, and printing to the restoration of damaged artifacts. First, 3D close-range scanning was utilized to make a high-resolution polygon mesh model of a roof-end tile with a missing part, and a 3D virtual restoration of the missing part was conducted using a haptic interface. Furthermore, the virtual restoration model was printed out with a 3D printer using the material extrusion method and a PLA filament. Then, the additive structure of the printed output with a scanning electron microscope was observed and its shape accuracy was analyzed through 3D deviation analysis. It was discovered that the 3D printing output of the missing part has high dimensional accuracy and layer thickness, thus fitting extremely well with the fracture surface of the original roof-end tile. The convergence of digital virtual restoration based on 3D scanning and 3D printing technology has helped in minimizing contact with the artifact and broadening the choice of restoration materials significantly. In the future, if the efficiency of the virtual restoration modeling process is improved and the material stability of the printed output for the purpose of restoration is sufficiently verified, the usability of 3D digital technologies in cultural heritage restoration will increase.

참고문헌 (38)

  1. Abidi, M. H., "Haptics assisted virtual assembly", IFAC-PapersOnLine, 48, pp.100~105 (2015)
  2. 안재홍, "문화 및 자연 유산의 해석을 위한 3차원 스캔 모델의 가시화- 공룡발자국의 기록과 해석 사례", 한국HCI학회 논문지, 8(1), pp.19~28 (2013), 한국에이치씨아이학회
  3. Balletti, C., "3D printing : State of the art and future perspectives", Journal of Cultural Heritage, 26, pp.172~182 (2017)
  4. 최원호, "단면형상 분석을 이용한 요철이 심한 금석문(金石文) 판독 향상 방법 연구", 한국IT서비스학회지, 13(2), pp.251~259 (2014), 한국IT서비스학회[DOI]
  5. Corrêa, C. G., "Haptic interaction for needle insertion training in medical applications : The state-of-the-art", Medical Engineering and Physics, 63, pp.6~25 (2019)
  6. Escobar-Castillejos, D., "A review of simulators with haptic devices for medical training", Education & Training, 40, pp.104~ (2016)
  7. Ford, S., "Invited review article : Where and how 3D printing is used in teaching and education", Additive Manufacturing, 25, pp.131~150 (2019)
  8. 한원식, "가역성을 갖는 도자기 복원용 무황변 우레탄 수지의 개발과 이를 이용한 도자기의 복원", 보존과학회지, 26(2), pp.183~190 (2010), 한국문화재보존과학회
  9. Hwang, H. S., "Experimental study of restoration material on ceramics: long-necked jar and gourd-shaped pitcher", Journal of Conservation Science, 19, pp.31~42 (2006)[DOI]
  10. "ISO", ASTM 52900, Standard terminology for additive manufacturing–General Principles–Terminology, 2015
  11. 조영훈, "석조문화재 디지털복원 및 구조안정성 평가를 위한 3차원 영상분석: 마곡사오층석탑", 보존과학회지, 25(2), pp.115~130 (2009), 한국문화재보존과학회
  12. 조영훈, "석조문화유산의 형상분석을 위한 3차원 디지털복원과 표면심도 모델링: 해운대 석각을 중심으로", 보존과학회지, 28(1), pp.87~94 (2012), 한국문화재보존과학회
  13. Jo, Y. H., "Displacement analysis of five-story stone pagoda in Geumgolsan Mountain, Jindo, using terrestrial laser scanning", Indian Journal of Science and Technology, 9, pp.1~6 (2016)
  14. 전병규, "3차원 영상분석을 이용한 대원사다층석탑의 안정성 평가", 보존과학회지, 22, pp.31~42 (2008), 한국문화재보존과학회
  15. Katz, J., "Digitized Maya music: the creation of a 3D database of Maya musical artifacts", Digital Applications in Archaeology and Cultural Heritage, 6, pp.29~37 (2017)
  16. Keles, M., "Tuning the center of gravity of 3D printed artifacts", Procedia Manufacturing, 17, pp.371~378 (2018)
  17. 김혜경, "3D 디지털 현미경으로 측정한 당백가시 인쇄본의 형상 특징", 보존과학회지, 33(1), pp.43~49 (2017), 한국문화재보존과학회[DOI]
  18. 김재웅, "Monitoring Changes of Designated Cultural Heritage Area Using 3D Mapping Technique", 한국전통조경학회지, 15, pp.43~51 (2017), 한국전통조경학회[DOI]
  19. Kyung, K. U., "The state of the art and R&D perceptives on haptics", Electronics and Telecommunications Trends, 21, pp.93~108 (2006)
  20. 이찬희, "함안군 대치리공룡발자국 화석의 3차원 영상분석과 손상도 평가 및 과학적 보존처리", 지질학회지, 48(2), pp.179~191 (2012), 대한지질학회[DOI]
  21. 이찬희, "중원탑평리칠층석탑의 재질특성과 산지추정 및 손상도 진단을 통한 보존처리", 헤리티지:역사와 과학, 43(3), pp.4~25 (2010), 국립문화유산연구원
  22. 이찬영, "월정교 출토 사자상 복원을 위한 모본 제작 연구", 보존과학회지, 31(2), pp.147~157 (2015), 한국문화재보존과학회[DOI]
  23. 이해순, "3D 프린팅을 이용한 토기 · 자기 문화재 복원 연구", 보존과학회지, 31(2), pp.131~145 (2015), 한국문화재보존과학회[DOI]
  24. 이주완, "칠백의총 중봉조헌선생일군순의비의 과학적 보존처리와 복원", 보존과학회지, 26(2), pp.191~201 (2010), 한국문화재보존과학회
  25. 이상진, "철기 유물 복원에 사용되는 에폭시 수지의 내후성 연구", 보존과학회지, 21, pp.41~48 (2007), 한국문화재보존과학회
  26. Machidon, O. M., "Virtual humans in cultural heritage ICT applications : A review", Journal of Cultural Heritage, 33, pp.249~260 (2018)
  27. 남병직, "문화재 복원용 속(速)경화형 Epoxy계 수지의 가속열화시험 및 고장분석 연구", 보존과학회지, 33(6), pp.467~483 (2017), 한국문화재보존과학회[DOI]
  28. 박소연, "가상현실기반 고구려 고분벽화의 오감체험형 콘텐츠 개발", 디지털디자인학연구, 8(4), pp.137~146 (2008), 한국디지털디자인학회[DOI]
  29. 박소연, "햅틱 디바이스를 통한 미륵사지 석탑 복원 체험 시스템 개발", 기초조형학연구, 8(3), pp.161~169 (2007), 한국기초조형학회
  30. Rastogi, N., "Control system design for tokamak remote maintenance operations using assisted virtual reality and haptic feedback", Fusion Engineering and Design, 139, pp.47~54 (2019)
  31. Sánchez-Aparicio, L. J., "Heritage site preservation with combined radiometric and geometric analysis of TLS data", Automation in Construction, 85, pp.24~39 (2018)
  32. 신연홍, "도자기의 표면 질감을 고려한 3D 프린터의 재료 선정 및 복원재료로서의적합성에 관한 연구", 한국도자학연구, 15(2), pp.131~144 (2018), 한국도자학회[DOI]
  33. Soler, F., "A complete 3D information system for cultural heritage documentation", Journal of Cultural Heritage, 23, pp.49~57 (2017)
  34. Wilson, L., "3D digital documentation for disaster management in historic buildings : applications following fire damage at the Mackintosh building, The Glasgow School of Art", Journal of Cultural Heritage, 31, pp.24~32 (2018)
  35. Wu, W., "A pilot study to assess the feasibility and accuracy of using haptic technology to occlude digital dental models", Journal of Dentistry, 46, pp.54~60 (2016)
  36. Xu, J., "Digital reproduction of historical building ornamental components : From 3D scanning to 3D printing", Automation in Construction, 76, pp.85~96 (2017)
  37. 양필승, "도자기 수리복원 방법의 변천과정에 관한 고찰", 보존과학회지, 27(1), pp.49~59 (2011), 한국문화재보존과학회
  38. Zhang, Y., "A multi feature fusion method for reassembly of 3D cultural heritage artifacts", Journal of Cultural Heritage, 33, pp.191~200 (2018)

관련 논문AI추천

Three-Dimensional Digital-Mold Modeling and Sand-Printing for Replication of Bronze Mirror이정민, 조영훈한국문화재보존과학회 · 보존과학회지2021 · 제37권 제1호수구여신(修舊如新) 관점에서의 문화재 복원에 관한 디자인 연구 - 3D 스캐닝과 3D 프린팅의 복합적 적용을 중심으로 -권효선, 배초문디자인융복합학회(구.한국인포디자인학회) · 디자인융복합연구(구.인포디자인이슈)2022 · 제21권 제3호3D 프린팅을 이용한 토기 · 자기 문화재 복원 연구위광철, 이해순한국문화재보존과학회 · 보존과학회지2015 · 제31권 제2호훼손 도자기 결실부 복원을 위한 3D 세라믹 프린팅 기술의 기초 적용성 연구오승준, 위광철한국융합학회 · 한국융합학회논문지2020 · 제11권 제11호풀 컬러 3D 프린팅을 이용한 도자기 복원 방법 연구신우철, 위광철한국문화재보존과학회 · 보존과학회지2020 · 제36권 제5호도자기의 표면 질감을 고려한 3D 프린터의 재료 선정 및 복원재료로서의적합성에 관한 연구신연홍, 황현성한국도자학회 · 한국도자학연구2018 · 제15권 제2호

이 간행물의 다른 논문 (9건)

Studies on Sized Silks for East Asian Painting Background이보영, 유효선pp. 1-10ATR‐FTIR Analysis of Adhesives Jointing Buddhist Scripture Scrolls in Medieval Korea(Goryeo Dynasty)오준석pp. 11-18Cleaning Fabricated Metal Thread: A Post‐treatment Stability Assessment after Artificial Deterioration and the Application of Synthetic Soil정용재, 황민선, 박해진pp. 19-31The Material Analysis and Conservation of Porcelain Enamel ‐ Focus of Porcelain Enamel Excavated at Former President Yoon Bosun's Birthplace ‐이정민pp. 33-40A Study on the Material Characteristics of Stone Tools Excavated from the Remain Point of Paleolithic Age in Osong Site, Cheongju한민수, 김재환pp. 41-49
원문 보기