Wave plate 습분제거기의 형상 변경을 통한 성능 개선
Performance improvement of wave plate mist eliminatorthrough geometry modification
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The geometry of popular wave plate type mist eliminator for the wet flue gas desulfurization process was improved, fabricated, and experimentally evaluated. A Mist eliminator is a type of inertial particle collector which collection efficiency is proportional to the velocity of the gas phase. However, as the amount of re-entrainment is also proportional to the gas phase velocity, there is a limitation for the gas phase flow rate. Re-entrainment is one of the most important issues in a mist eliminator and is likely to occur as the input of the liquid phase and flow rate of the gas phase increase. In order to resolve this problem, the projection angle of the improved mist eliminator is set to 30° from the conventional one while maintaining the cross-section. With low flow rate conditions, the modified mist eliminator showed a similar pressure drop and overall collection efficiency. However, with conditions in which re-entrainment is obviously occurring, the modified mist eliminator showed better performance in draining droplets than the conventional one. As a result, the modified mist eliminator showed higher overall collection efficiency.
Abstract
The geometry of popular wave plate type mist eliminator for the wet flue gas desulfurization process was improved, fabricated, and experimentally evaluated. A Mist eliminator is a type of inertial particle collector which collection efficiency is proportional to the velocity of the gas phase. However, as the amount of re-entrainment is also proportional to the gas phase velocity, there is a limitation for the gas phase flow rate. Re-entrainment is one of the most important issues in a mist eliminator and is likely to occur as the input of the liquid phase and flow rate of the gas phase increase. In order to resolve this problem, the projection angle of the improved mist eliminator is set to 30° from the conventional one while maintaining the cross-section. With low flow rate conditions, the modified mist eliminator showed a similar pressure drop and overall collection efficiency. However, with conditions in which re-entrainment is obviously occurring, the modified mist eliminator showed better performance in draining droplets than the conventional one. As a result, the modified mist eliminator showed higher overall collection efficiency.
참고문헌 (16)
- Al-Dughaither, A. S., "Investigating droplet separation efficiency in wire-mesh mist eliminators in bubble column", Journal of Saudi Chemical Society, 14(4), pp.331~339 (2010)
- Atia, S., "Optimization of the Length of the Mist-eliminator Blades for Small Size Water Powered Scrubber", Geosystem Engineering, 6(2), pp.27~32 (2003)
- Azzopardi, B. J., "Re-entrainment in wave-plate mist eliminators", Chemical engineering science, 57(17), pp.3557~3563 (2002)
- Brunazzi, E., "Design of wire mesh mist eliminators", AIChE journal, 44(3), pp.505~512 (1998)
- Burkholz, A., "Droplet separation" (1989), VCH Publishers
- El-Dessouky, H. T., "Performance of wire mesh mist eliminator", Chemical Engineering and Processing : Process Intensification, 39(2), pp.129~139 (1999)
- Moon-Won Kim, "Performance improvement of a horizontal zigzag type mist eliminator using slit plates", Journal of Mechanical Science and Technology, 35(5), pp.2229~2236 (2021), 대한기계학회[DOI]
- Fabian, P., "Demystifying the selection of mist eliminators", Chemical engineering, 100(11), pp.148~ (1993)
- Galletti, C., "A numerical model for gas flow and droplet motion in wave-plate mist eliminators with drainage channels", Chemical engineering science, 63(23), pp.5639~5652 (2008)
- Gharib, J., "Determination the factors affecting the vane-plate demisters efficiency using CFD modeling", J. Chem. Eng. Process. Technol. S, 1, pp.1~5 (2012)
- James, P. W., "The role of drainage channels in the performance of wave-plate mist eliminators", Chemical Engineering Research and Design, 81(6), pp.639~648 (2003)
- James, P. W., "A model for liquid film flow and separation in a wave-plate mist eliminator", Chemical Engineering Research and Design, 83(5), pp.469~477 (2005)
- Kouhikamali, R., "Numerical study of performance of wire mesh mist eliminator", Applied Thermal Engineering, 67(1-2), pp.214~222 (2014)
- Mao, F., "Re-entrainment in and optimization of a vane mist eliminator", Annals of Nuclear Energy, 120, pp.656~665 (2018)
- Narimani, E., "Optimization of vane mist eliminators", Applied Thermal Engineering, 31(2-3), pp.188~193 (2011)
- Zhao, J., "Study of the separation efficiency of a demister vane with response surface methodology", Journal of Hazardous Materials, 147(1-2), pp.363~369 (2007)